|
Post by sleepinsol on Jul 26, 2009 18:01:14 GMT -5
what sort of power numbers can i expect from an 88 t/c with a stock ihi and bolt ons. ive got a bob log, ranger roller cam, greddy fmic with 2.5" piping, ill be running a blow thru vam setup, 3" intake pipe with a k & n filter, open 3" dp, a kirban fpr to tune the fuel curve with, forge bov, and a gillis valve set at around 17-18 psi. ill be using the zeitronix zt2 wideband datalogger and im going to tune my afr to 11.5-11.8:1 at 12 * timing at the distributor or so as long as it doesnt knock. it already has the walboro in it, and we have 93 octane fuel here in fl. i know this question is general but it may give others an idea of what to expect from their setups as well. i know the turbo will be the biggest power limiter as well. all motors are different, but im just looking for a ball park range. also any criticism on this setup is welcome .
|
|
|
Post by Stinger on Jul 27, 2009 13:37:21 GMT -5
I'd say 230-250rwhp if the tune is dialed in pretty well.
|
|
|
Post by sleepinsol on Jul 27, 2009 21:41:15 GMT -5
thank you! any idea on tq numbers?
|
|
|
Post by Stinger on Jul 28, 2009 0:35:14 GMT -5
300-330ft/lb
|
|
|
Post by sleepinsol on Jul 28, 2009 18:40:45 GMT -5
is the stock clutch good for that amount of tq?
|
|
|
Post by Stinger on Jul 28, 2009 23:15:22 GMT -5
If it's in good shape it should be.
|
|
|
Post by sleepinsol on Jul 29, 2009 1:41:23 GMT -5
thank you for your help. it should be a fun little car to drive around until i can fork it over for a bigger turbo and some itakes!
|
|