|
Post by Matt Culpepper 2300gearjammer on Sept 25, 2011 11:26:44 GMT -5
Ha. You better go full tilt on the volvo head. Definitely no dyno meet. You might post that on TF since my account never got unlocked after the last crying fit that curtis threw.
|
|
|
Post by denz on Sept 25, 2011 21:10:36 GMT -5
Really I did not here about this one with curtis, I was wondering why I did not see any post from u. And no meet yhis year to bad. Maby Ill have to go threw with mine(meet). As far as the folvo head goes I dont think its as far as u think, Its just the rest of the motor.
|
|
|
Post by Matt Culpepper 2300gearjammer on Sept 25, 2011 21:19:16 GMT -5
Oh ha. I think you were saying you might give the head a tune-up. You keep running yours and getting it worked out so when I try to do one for the MG I'll be able to bother you and Don.
|
|
|
Post by denz on Sept 27, 2011 21:29:10 GMT -5
Well looks like there might be some changes made this winter. I might have just made my weak botom end probs go away. Damb Matt this Project bolt on - Folvo race might be closer than we think if we both keep going like this.
|
|
|
Post by Matt Culpepper 2300gearjammer on Oct 2, 2011 22:35:41 GMT -5
Yeah it could happen. Once I'm running I do plan to travel some next year for the points series.
|
|
|
Post by denz on Oct 4, 2011 22:46:42 GMT -5
You really going to run that pass seat. Looks like some mods to get that shifter to work in there.
Do some traveling are u. Well if u come to milan dragway u are more than welcom to stay at my place.
|
|
|
Post by Matt Culpepper 2300gearjammer on Oct 16, 2011 18:38:30 GMT -5
|
|
|
Post by bobbarker on Oct 16, 2011 19:13:07 GMT -5
Nice to see it moving! Is that the coil pack moving around?
|
|
|
Post by Matt Culpepper 2300gearjammer on Oct 16, 2011 19:25:15 GMT -5
I have the correct valve cover with a coil mount. Clearly its not on yet. lol
|
|
|
Post by FRANK/TurboTempo on Oct 16, 2011 19:43:14 GMT -5
Love the vid what a nice idea for a vid.
|
|
|
Post by oneowner88lx on Oct 16, 2011 21:44:20 GMT -5
Cool video. That engine makes some really nice sounds!!
|
|
|
Post by Stinger on Oct 16, 2011 22:25:49 GMT -5
The car isn't built for twisties...better stick to straight roads!
|
|
|
Post by Matt Culpepper 2300gearjammer on Oct 17, 2011 6:14:18 GMT -5
I should def be smacked for doing that one slicks/skinnies. I thought it was going to keep turning on the first right hand turn.
|
|
|
Post by Stinger on Oct 17, 2011 11:24:15 GMT -5
I'd try the next vid with the GoPro on the inside of the windshield...I think the sound will be better since there will be less wind noise.
|
|
|
Post by Matt Culpepper 2300gearjammer on Oct 17, 2011 18:35:02 GMT -5
yeah...So I was all about that for some shifting vid but the suction cup mount on the pass window wouldnt get all of the driver's side. If the mount would swivel right where the camera attaches it would be fine. I'm going to get a roll-bar mount this week I guess.
|
|