|
Ms2 timing
Dec 24, 2015 16:11:32 GMT -5
via mobile
Post by jorsocr16 on Dec 24, 2015 16:11:32 GMT -5
I set my timing to 20* btdc like I was told to. And when I go into tunerStudio and "use table" the computer is telling me that it is indeed advancing the timing, when I put the timing light back on it, it is still showing 20* no matter what. Someone was telling me that it's normal but I'm not convinced. 2.3t Essy d-port 2277 cam Scott Wilson ms2 Precision 5952e
|
|
|
Ms2 timing
Dec 24, 2015 16:54:17 GMT -5
via mobile
Post by Stinger on Dec 24, 2015 16:54:17 GMT -5
Is the spout connector plugged in for all of this? If it's in but not advancing timing then you'll need to contact the ECU builder.
|
|