mavereq
Microsquirt Premium
Posts: 239 
|
Post by mavereq on Sept 25, 2016 20:02:33 GMT -5
I have a Ron Francis wiring harness part number PM-65 that I bought from another tf member. I'm wanting to use it on my 84 SVO. On the original harness, there's a group of wires that runs across the top of the dash. I assume those are for the gauges. Should I just splice the gauge wires into those existing wires? Do you happen to know the color codes for those?
|
|
mavereq
Microsquirt Premium
Posts: 239
|
Post by mavereq on Sept 25, 2016 20:14:19 GMT -5
Also, the harness was plugged into these plugs really close to the ecm. I'm sure I could trace them out if I pulled the entire dash, but I'm trying to avoid that.  |
|
mavereq
Microsquirt Premium
Posts: 239
|
Post by mavereq on Sept 25, 2016 21:20:21 GMT -5
Digging in a little further. The wires running across the top of the dash is comprised of one red, one heavy yellow, and two tan wires with green dots. The red and yellow both branch off to multiple places.
|
|
|
|
Post by Stinger on Sept 25, 2016 23:10:59 GMT -5
You're best to contact the manufacturer for these types questions as they are equipped with the techs to help you out. We don't have chassis wiring diagrams here.
|
|
|
|
Post by area351 on Feb 19, 2017 16:30:36 GMT -5
NOT FOR SURE, BUT THEY REMIND ME OF THE PLUGS THAT GO TO THE SWITCHES ON EITHER SIDE OF THE GAUGE CLUSTER. HAZARD LIGHTS, FOG, HEADLIGHTS.
ITS BEEN A WHILE SINCE I WAS INSIDE MY GAUGE CLUSTER. THE SINGLE PLUG THINGY. NOT SURE. ANTENA?
|
|
mavereq
Microsquirt Premium
Posts: 239
|
Post by mavereq on Feb 19, 2017 22:20:51 GMT -5
That was a long time ago. I got a Ron Francis chassis harness.
|
|
