|
Post by 2.3T Fan on Nov 16, 2008 18:46:09 GMT -5
I dont know much (anything) about Turbos.. (So please Excuse my Stupidity)
Can I take a 4 cyl Mustang n just Put the Turbo Exhaust Manifold on it n run the car that way?? N leave everything else stock??? Or is that a No No???
|
|
|
Post by Stinger on Nov 16, 2008 22:01:25 GMT -5
|
|
|
Post by 2.3T Fan on Nov 16, 2008 23:43:48 GMT -5
Ok.. What if I put a Turbo Coupe Motor, in there??? Can I get the Computer Tuned for the Turbo??? I have Built motors before, I just BlOW A$$ when it comes to Computers n Wires...
I have seen some people using a Carb on these Motors.. What CFM carb would be good for 23 PSI on a T3, n about 275RWHP..
|
|
|
Post by Stinger on Nov 17, 2008 5:12:45 GMT -5
The answers to those questions were in that same link. I have an 87-90 and 91-93 turbo swap guide/wiring info page on my site, as well as additional information about turbo swapping on the site and in the FAQ link above. You just run a turbo ecu, then you don't have to worry about tuning it at that power level. You'll need a carb built for blow-thru applications (not cheap) and there is really no point when the EFI swap is so easy.
|
|