|
|
Post by 88turbobird on Mar 19, 2019 8:05:39 GMT -5
I'm going to put a fuel cell in the trunk as I'm modifying the entire fuel system on the car. I have brackets to mount the tank but the trunk is very uneven. I was thinking of "massaging" the trunk bed to make it flat which would in turn help with whatever mounting system I come up with. What's everyone's thoughts on this? Anyone mount a cell in the trunk of an 88 TC? Thanks!
|
|
|
|
Post by Stinger on Mar 19, 2019 13:03:35 GMT -5
Once you're cutting the floor there is no turning back so I don't see any harm in making it flat if it helps mount the cell.
|
|
|
|
Post by 88turbobird on Mar 19, 2019 14:14:14 GMT -5
Once you're cutting the floor there is no turning back so I don't see any harm in making it flat if it helps mount the cell. That's what I'm thinking. I'm not opposed to cutting the floor but I rather not if I don't have to |
|
|
|
Post by Stinger on Mar 19, 2019 14:51:54 GMT -5
Other option is to make some sort of filler panel to flatten it out. It would basically sit or bolt in the trunk and the cell would mount to it/through it.
|
|
|
|
Post by firewheel56 on Mar 19, 2019 22:04:30 GMT -5
i think STINGER is right. can you make a wood frame of some kind and full it with foam in a can . put plastic on tank so it willnot stick bolt it down . but do a little at a time not to much and watch the tank to make sure it is not boeing your tank.
|
|
