|
|
Post by rhodes93 on Oct 7, 2019 11:33:44 GMT -5
I don’t know if I’m posting in he right place but I have a 2.3 1990 ranger 2wd and a 87 turbo coupe. I want to do the swap!!! Can someone tell me any modifications I’m going to indure during this swap? The only thing I have really seen is trimming the heater box and swapping wiring and Ecu. Any help would be greatly appreciated!!!
|
|
|
|
Post by Stinger on Oct 9, 2019 7:20:28 GMT -5
That's basically it. If you want to avoid the heater box mods you can use our flip adapters instead.
Our 91-93 Mustang swap page is very similar in terms of wiring mods needed, aiming your Ranger is the dual plug version. If it's not then the 87-90 swap page would be more fitting.
Upgrading to the larger turbo sized clutch would be a thing to consider as well.
|
|
