|
|
Post by Stinger on Dec 1, 2010 14:04:02 GMT -5
Surprisingly not many people fit the bill for prototype testing. The first person I chose ran into financial problems and I'm waiting to see if they can swing the prototype, the second tester is waiting in the wings.
|
|
|
|
Post by immloki on Dec 1, 2010 23:26:39 GMT -5
Lol. Everybody that has the money to spend, their car isnt up and going. Those with running cars are broke. Hehe, probably spending all their money on tires.
|
|
|
|
Post by bobbarker on Dec 2, 2010 12:02:13 GMT -5
I could buy a wide band O2 and intall the hard ware real quick, but you would probably have to hold my hand through the tuning process! I'm gonna have a retarded amount of questions I'm sure...
|
|
|
|
Post by alexs93lx on Dec 2, 2010 13:03:31 GMT -5
I'll be a guinea pig in about 4 months haha! Just assembly and a million other things. Then I'll be ready!
In all seriousness, I recall regularly reading "can I put my money down in advance?" "I'm ready to buy" and so on.
Where are all of these people now?
|
|
|
|
Post by bobbarker on Dec 2, 2010 16:51:14 GMT -5
I haven't gone anywhere. I still want to buy now  |
|
|
|
Post by boostgobbler on Dec 3, 2010 10:30:14 GMT -5
I'll be a guinea pig in about 4 months haha! Just assembly and a million other things. Then I'll be ready! In all seriousness, I recall regularly reading "can I put my money down in advance?" "I'm ready to buy" and so on. Where are all of these people now? I have my money for this set aside right now, and i would buy one right now but i wont even beable to look at my car for another 3 weeks and even then i still need to install a few things with may take 1-2 weeks after that i have obligations that would prevent be form having time to mess with a tune so i dont fit the requirements for the prototype. Witch is probably the problem with allot of other people in addition to that possibility that some dont need it for there set ups yet. |
|
|
|
Post by alexs93lx on Dec 3, 2010 13:48:47 GMT -5
It's not a personal shot at anyone haha. I just know when I say those things, I'm prepared to drop the money.
I understand how things change, christmas is right around the corner and I probably won't be purchasing my rods until after the first of the year. If you want to go fast without concerns, it's not cheap. I figure I still need another 2 grand before my project is complete.
|
|
|
|
Post by boostgobbler on Dec 8, 2010 10:39:16 GMT -5
Status report? I have my fingers crossed for the first week of January.
|
|
|
|
Post by Stinger on Dec 8, 2010 14:40:52 GMT -5
Our final prototype tester should have the ecu next week. Once he has positive results, it will take 3 weeks to get the final board design manufactured and shipped to us. Then it's ready to sell as soon as we get a few assembled.
|
|
|
|
Post by alexs93lx on Dec 8, 2010 16:18:21 GMT -5
This is great news! I'm looking forward to hearing/reading more as time passes. Congrats on the success so far Shannon.
|
|
|
|
Post by bgpickle on Dec 9, 2010 1:18:25 GMT -5
will it have auto tune (adaptive learn) capability as most of the major efi/ecu systems are going in that direction?
|
|
|
|
Post by Stinger on Dec 9, 2010 4:16:00 GMT -5
Yes, it will have auto tune.
|
|
|
|
Post by leroy420b on Dec 28, 2010 20:43:24 GMT -5
I have been chomping at the bit waiting to get one of these. So to make it a smoother install i wanted to know if there is any wide band you would recommend and is that all that is necessary to get this up and running other than the hose to the map sensor and disconnecting the vam and of course replacing the La3 with the P.I.M.P
|
|
|
|
Post by Stinger on Dec 28, 2010 23:46:20 GMT -5
It will be setup to use the AEM wideband by default. Any wideband will work but the AEM is the easiest install. You've got the rest covered.
|
|
|
|
Post by bobbarker on Dec 29, 2010 8:14:24 GMT -5
I searched for AEM wideband o2 and it came back with 2 different numbers, one was the 30-4100 and the other was 30-2310. Which do I need?
|
|
