|
Post by boostgobbler on Dec 8, 2012 13:06:41 GMT -5
Im going to loosen up the bolt that slides threw the engine mount and see if that makes a difference in vibration at idle, if not then this thing is going buh bye! Unless chuck can make custom bushings, then maybe ill sent these off to him.
|
|
|
Post by boostgobbler on Dec 8, 2012 19:15:12 GMT -5
I loosen the mount bolt on each side a little and fired it up, no change, didn't really think there would be i just wanted to check, then i tightened them back up and took this Video. s787.beta.photobucket.com/user/boostgobbler/media/MVI_0149.mp4.htmlSo ill be picking up a PA racing or a Team z k member, i just have to question them a bit before i decide.
|
|
|
Post by boostgobbler on Dec 9, 2012 0:17:56 GMT -5
this video is when I had my chucks in while the factory K-member I don't keep the car long but its enough to NOT hear the sound of EVERYTHING in the car vibrating.
|
|
|
Post by Stinger on Dec 9, 2012 3:15:04 GMT -5
Yeah that's pretty bad. I wonder why they didn't make their k-member like everyone else and utilize the stock mount pads?
|
|
|
Post by boostgobbler on Dec 9, 2012 5:15:52 GMT -5
I don't know, just trying to be different i guess, I don't think the V8 guys have as much trouble with the vibration though. Witch ever is lighter between PA and Team z is what ill end up going with, as soon as i get the money its getting ordered and this is going up for sale.
|
|
|
Post by boostgobbler on Dec 15, 2012 4:34:50 GMT -5
Ok so i bleed the brakes and I have noticed that i have a fairly significant miss fire condition above idle, Id like to get this settled before I switch back to the pimp and my big injectors.
|
|
|
Post by boostgobbler on Mar 25, 2013 10:44:07 GMT -5
Ill get the hang of this eventually.
|
|
|
Post by Stinger on Mar 25, 2013 13:54:22 GMT -5
Good deal!
|
|
|
Post by boostgobbler on Apr 27, 2013 15:04:03 GMT -5
Oh yeah!
|
|
|
Post by Stinger on Apr 28, 2013 0:45:27 GMT -5
Nice!
|
|
|
Post by Spoolin-SVT on Apr 28, 2013 23:58:22 GMT -5
Glad to see it going. That is one clean 84 four eyed!
|
|
|
Post by boostgobbler on Apr 29, 2013 0:04:49 GMT -5
Thanks guys, just a bit more fine tuning to do and then its off to the dyno.
|
|
|
Post by spoolin23t on Aug 14, 2013 15:16:17 GMT -5
any updates.. love the build
|
|
|
Post by filasfinest86 on Aug 23, 2013 0:25:01 GMT -5
Nice gobbler any updates? I'm really debating on ditching my blow tru setup
|
|
|
Post by boostgobbler on Dec 25, 2013 4:48:37 GMT -5
I haven't been on here in forever and I haven't done much to the Stang but Feb-Apr I have some plans. I haven't even made it to a dyno yet. Derek If I where you Id set go P.I.M.P. If you can manage to save the money. I love this thing!
|
|