|
|
Post by seafoam on May 17, 2011 3:55:58 GMT -5
Please put me on the list - I have been waiting for a stand alone for quite a while and since my TFI died it's time to get it done. I am ready to buy now.
|
|
|
|
Post by Stinger on May 17, 2011 13:37:09 GMT -5
I see where you say if you can prove you were interested earlier than the date you are on the list you might get moved up. I emailed your sales dept. on march 31 asking if you were still taking pre orders. Shannon G. replied that you were not taking orders and a full release would be between April 12th-15th. I still have this conversation saved, would it help? If you can pm me the email address and email title used for this conversation, I can look it up. |
|
|
|
Post by pdrmotorsports on May 18, 2011 2:20:34 GMT -5
Please Add Me To The List, Cash In Hand. Thanks
|
|
|
|
Post by turboman2208 on May 18, 2011 21:11:30 GMT -5
i'm number 52 right now. (j.pierce) I would like to have this by end of june, 1st of july at the latest. So put me there and i will have money ready!
|
|
|
|
Post by turboman2208 on May 18, 2011 21:14:26 GMT -5
This may have been answered and i just didn't understand.
If i have a stock cam now and order the PiMP and then later get Bo's Stg 3 setup.
What will i need to do?
Will i be able to set it up for the stg 3 setup or what?
|
|
|
|
Post by Stinger on May 18, 2011 22:48:25 GMT -5
This may have been answered and i just didn't understand. If i have a stock cam now and order the PiMP and then later get Bo's Stg 3 setup. What will i need to do? Will i be able to set it up for the stg 3 setup or what? You'll just need to re-tune the fuel table, either starting with your current tune, or asking for our Stg 3 base tune to start with. Shouldn't take more than 30 minutes if you are comfortable with the tuning process by that point. |
|
|
|
Post by Carl on May 19, 2011 12:21:10 GMT -5
The way this list is shaping up I may want my name on there now. I will back stateside at the end of Sept, so beginning to mid October is when I will order mine.
|
|
don33
Boosting 25 psi
Posts: 127
|
Post by don33 on May 21, 2011 23:12:21 GMT -5
I'm going to go ahead and put my name on the list for a PIMP for the pinto... I will be ready to buy in july.
|
|
|
|
Post by thefreeak on May 27, 2011 10:56:57 GMT -5
Please add me to the list as "interested".
If you were to call me tomorrow and tell me there's one available, I'll buy it.
|
|
|
|
Post by jeffw on May 28, 2011 14:49:46 GMT -5
I keep getting moved down the list.....
|
|
|
|
Post by Stinger on May 28, 2011 14:55:27 GMT -5
The numbers on the list have changed a few times as I've found duplicate numbers or skipped numbers so I had to manually go in and re-number everybody.
I've also moved a few people around because they've provided info showing they asked about it earlier than I had them originally listed at and such.
|
|
|
|
Post by 86svo9l on May 31, 2011 2:26:12 GMT -5
My car will be ready toward the middle of July and I have cash in hand waiting to purchase. My name is on the list as D Rickett.
|
|
cmr63
Boosting 5 psi
Posts: 18
|
Post by cmr63 on Jun 1, 2011 11:02:45 GMT -5
Please add me to the pimp waiting list.
|
|
|
|
Post by louie hunter on Jun 1, 2011 22:28:53 GMT -5
hello pls put me on the list for the pimp ecu! Im ready 2 buy yesterday. I have a 87 merkur with Bo's stage 3 head gutted upper lower, 2.5 bottom, stinger stage 3 clutch, 3in exhaust, t-5 tranny. whats the best injectors to use with this ecu???
|
|
|
|
Post by Stinger on Jun 2, 2011 0:50:34 GMT -5
Added you to the list, you'll need to create a username or some way for me to contact you when it's your turn though.
If you're purchasing injectors for use with the PiMP, we suggest you purchase the high impedance units we list on our site, though any of the injectors we list will work just fine.
|
|
