|
Post by warwickben on Apr 16, 2012 17:43:12 GMT -5
Long story short.... The Capri I'm building the guy did a 5.0 swap we put the stock 2.3 that was in the hatch ,back in. We don't have a stock ecu injectors etc etc.
We plan on using a pimp.
Me and my buddy are stressing about this....
once we get the car wired up put back together ,how do we go about starting it all up. Most every thing I've read reads like the car is allready running on a stock ecu and you swap it out .
I know you need to set fuel pressure and little things like that with other sensors... How would one go about this if you starting from scratch?
|
|
|
Post by Stinger on Apr 16, 2012 23:22:08 GMT -5
It shouldn't really be any different, assuming there aren't any issues with the wiring, cam timing, or faulty sensors.
|
|