black
Boosting 20 psi
Posts: 89
|
Post by black on Mar 2, 2013 8:06:29 GMT -5
Looking to buy a head. Preferably one that is ready to go and I can just bolt on. But will take a bare head to. Just want to get a head put on this thing so I can try to get it up and running. Once it's running then we'll worry about head work, but a running car is better than no running car at this point.
|
|
becools
Boosting 25 psi
Addicted to boost..
Posts: 110
|
Post by becools on Mar 3, 2013 15:59:14 GMT -5
Pm sent
|
|
black
Boosting 20 psi
Posts: 89
|
Post by black on Mar 4, 2013 16:17:09 GMT -5
replied
|
|
black
Boosting 20 psi
Posts: 89
|
Post by black on Mar 6, 2013 12:19:43 GMT -5
Very interested, shoot me some pics to the email I listed in the Pm.
|
|
|
|
Post by arummel93 on Mar 9, 2013 19:34:21 GMT -5
PM me if you still need a head. I have a bare head already milled down and painted that was waiting to go onto my car, but plans have changed. Also have a set of inconel valves and stock springs i can re-install. Has new cam bearings and valve seals. Just slap in a cam and bolt it down.
May also have a ranger cam setup I can put in it for you.
|
|
|
|
Post by 1bad84svo on Mar 14, 2013 0:36:01 GMT -5
I have a head available that was recently rebuilt.. Went a different route and kept this as a spare but am willing to part w/ it if you want it..
|
|
black
Boosting 20 psi
Posts: 89
|
Post by black on Mar 15, 2013 15:50:30 GMT -5
I have a head available that was recently rebuilt.. Went a different route and kept this as a spare but am willing to part w/ it if you want it.. Thanks, but one should have been shipped to me today. |
|
|
|
Post by arummel93 on Mar 15, 2013 16:38:31 GMT -5
Yep, dropped it off around noon.^
Hope you get a good life out of it, I'd like to see how it does for ya. Keep me posted!
|
|
