|
Post by 86fiveoh on Apr 25, 2016 17:32:50 GMT -5
Finally got my junk on the dyno last Saturday. Did a few pulls and had a few issues, mainly boost leak and blowing off couplers. Final results weren't bad though for a low compression 302. Didn't really mess with timing because of the other issues, but did make 597rwhp. Setup is a 302, AFR185 heads, custom cam, Systemax intake, vortech blower and self tuned with a PiMP
|
|
|
Post by crazyhorse on Apr 25, 2016 18:54:40 GMT -5
Holy hell. Is that corrected numbers?
|
|
|
Post by Stinger on Apr 25, 2016 20:29:22 GMT -5
Congrats! How much boost?
That should be enough to split the block in no time (assuming it's a factory block)!
|
|
|
Post by 86fiveoh on Apr 26, 2016 17:16:14 GMT -5
Yeah std corrected, sae was 582/515, I tried to attach my dyno graphs with no luck. It was 20psi, but no increase from 6300 to 6900.
|
|
|
Post by 86fiveoh on Apr 26, 2016 17:16:33 GMT -5
And it's a Boss block
|
|
|
Post by Stinger on Apr 26, 2016 22:47:25 GMT -5
Very nice. Post these numbers in the "Running PiMP's" thread, or update your original post if you already posted in there.
|
|
|
Post by 86fiveoh on Apr 28, 2016 21:52:09 GMT -5
Ok, no problem
|
|