|
Post by imthemuskrat on Aug 17, 2016 22:08:11 GMT -5
Stock long block stock timing, 93 pump on 18psi 55mm t3. Bolt ons. 27x10.5 et dot. Tubular suspension strange... One brand new shock was sticking right rear on this night.
Fixing that now. Put on a new s/c theottlebody on. Adjustbale timing gear to take some timing out of cam. See how fast it can go with low boost. Then some better fuel and retune 25-26psi.
1.6x 60s leaving 5100 rpm 5psi trapping 83-84mph letting off and dragging the brake. These nights have been 85-95 degrees- d/a 4800-5500 ft. Car is not making very much power to going this fast.
Trying to figure out hard soft cut for launch. Not really sure if I have it working against each other
Racing friends rousch charged coyote
Racing friends 4v car running 200 hit of gas
|
|
|
Post by Stinger on Aug 17, 2016 23:27:02 GMT -5
That's getting it done! Thanks for posting the vids.
Post in the PiMPx section about the launch settings if you want us to verify you've got things set up correctly.
|
|
|
Post by imthemuskrat on Aug 18, 2016 4:41:17 GMT -5
I will. I've been researching a bunch about my head/cam build this winter. Have a friend do a 50-60cfm extra flow over stock port job. Clearance for valves.. But no clear winner on what cam I want to try...
This is jus a hot street /strip. I drive it all the time, race it even harder. NOT A dailyits full interior/kirkey/full suspension/ no power anything. Just steering wheel and radi. The car is at 2480 race weight with me in it. I only run 1/8 mile drag. So bottom 7s is my goal with the car or 6.9...
|
|
|
Post by Stinger on Aug 18, 2016 9:31:05 GMT -5
Man that's light for an aero style Mustang.
|
|
|
Post by imthemuskrat on Aug 18, 2016 10:46:50 GMT -5
What cam would you recommend trying out?? I can't research and find specs on any boports. Rough idle doesn't bother me. I would like to try a good cam next year that'll make power 4-6500ish. And Obo 375-400whp is my guess it'll take to run bottom 7s with my car...I'm still using the oem slider cause the stock head is limited.
|
|
|
Post by Stinger on Aug 18, 2016 12:19:38 GMT -5
The engle "Hot Pinto Turbo" cam is what Wes used to make 385hp at low 20's boost, Boport stage 3 or 2.5 would be good, Esslinger 2277 would be good as well.
|
|
|
Post by imthemuskrat on Aug 18, 2016 17:02:48 GMT -5
Dang never hear of the pinto cam.. The 2277 has been brought to my attention a few times and the boport. I'll have to make a decision one day
|
|
|
Post by Stinger on Aug 18, 2016 17:05:33 GMT -5
It's not actually a Pinto cam (meaning it doesn't have any roots in that vehicle) it's a custom cam they made for Wes and then gave it that goofy name.
|
|
|
Post by karl on Aug 19, 2016 10:11:03 GMT -5
hey, sorry to cut in. I'm trying to sell a boport 1.9 cam if your interested. 4-7k powerband with no machining required. just an option for ya
|
|
|
Post by imthemuskrat on Aug 20, 2016 22:42:57 GMT -5
What kinda price? I
|
|
|
Post by karl on Aug 21, 2016 16:52:49 GMT -5
Pm sent
|
|