Post by turbochallenged on Nov 3, 2016 19:43:29 GMT -5
Here's some pics of our '31 Model A powered by a '88 Turbo Coupe 2.3L. This project has been going on for about 3 years and these are of the initial build and mockup. Currently the truck is in pieces for the motor build and final welding on the frame. The rest of the drivetrain are a T-5 and a Winters quickchange. Motor mods include:
.030 over CP pistons stock crank turned 10-10 reconditioned stock rods fully reworked, ported and polished iron head Manley big valves Boport 2.5 cam gutted upper, knife-edged lower intakes Borg Warner 7064 turbo Siemens 60 lb injectors Stinger fuel rail Pimpx Stinger harness
Post by turbochallenged on Nov 5, 2016 5:48:00 GMT -5
Scoot in a good way, I hope. The quickchange has a locker in it with the weakest springs. We can move it around the shop pretty good, I just hope we don't have a push on the road especially if it's wet.
Post by turbochallenged on Mar 18, 2017 19:52:52 GMT -5
Here are some pictures of our motor going back together, cam is dialed in, lower intake and injectors installed, and header is installed. Still welding and tweaking the frame, almost ready for media blasting and paint. Other pictures are of the original mockup that didn't make it into the original post.