|
|
Post by Stinger on Dec 23, 2018 20:22:41 GMT -5
It's not on the site a we're waiting to release the kit but it can be purchased if desired.
|
|
|
|
Post by karl on Dec 27, 2018 12:40:24 GMT -5
expected release? or how can I go about ordering pre-release? I currently have a order "in cart" ready to place for building the harness myself and would like to get the ball rolling ASAP.
thanks
|
|
|
|
Post by Stinger on Dec 27, 2018 13:32:02 GMT -5
PM sent
|
|
|
|
Post by n20capri on Dec 27, 2018 16:40:26 GMT -5
I'm interested in the entire COP package for my V8 Capri - PM or email with details please. :-)
|
|
|
|
Post by Stinger on Dec 27, 2018 19:46:24 GMT -5
Don't have the whole kit for a few weeks yet so nothing to PM about yet.
|
|
|
|
Post by n20capri on Dec 28, 2018 18:17:05 GMT -5
It's not on the site a we're waiting to release the kit but it can be purchased if desired. Don't have the whole kit for a few weeks yet so nothing to PM about yet. Ahhh - Saw this so I was curious... |
|
|
|
Post by Stinger on Dec 28, 2018 22:18:33 GMT -5
Harness is ready, CAS is not. Comment above was about harness.
|
|
|
|
Post by infidelracing on Jan 1, 2019 20:56:25 GMT -5
Ok so if the harness plugs in to the expansion port does it still have the imputs for 2 step and all the other stuff and if so i have another question if you can private message me
|
|
|
|
Post by Stinger on Jan 1, 2019 23:10:07 GMT -5
Yes, all of the other functions are still there, it's a fully populated expansion. The "extra" stuff is rolled up near the ECU so you don't have to try to hide anything you're not using as you'll only pull the stuff you need through the firewall.
|
|
area47
Boosting 20 psi
Posts: 80 
|
Post by area47 on Jan 2, 2019 12:17:43 GMT -5
i am growing intrigued with this setup.  |
|
|
|
Post by 19lightning93 on Jan 8, 2019 17:52:25 GMT -5
If anyone is interested there's a guy on the Megasquirt Facebook page selling the LS coils with bracket and pigtail for $20 a side. If your thinking about going this route.
|
|
|
|
Post by lxsmith2 on Jan 12, 2019 8:15:37 GMT -5
I d looks to try this.
|
|
|
|
Post by xtcnagt on Jan 18, 2019 1:18:37 GMT -5
Are we still on hold for epm? Any updates on release details/pics/description?
My coils and pimpxs install are waiting on epm
|
|
|
|
Post by xtcnagt on Jan 18, 2019 1:20:35 GMT -5
Are we still on hold for epm? Any updates on release details/pics/description? My coils and pimpxs install are waiting on epm ELPM is CAS in case that wasnt clear |
|
|
|
Post by Stinger on Jan 18, 2019 4:12:17 GMT -5
Yes, waiting for the machine shop to tell us the CAS is done. Here are a few pics of one of the prototypes.   |
|
