|
Post by shizznizz980 on Sept 11, 2018 23:01:34 GMT -5
Ok so I made the mistake of removing my perfectly good ac and now I want to reinstall it but I now have a pimp ecu, and pimp specific harness. No longer have the factory relay box. Anyone know how I need to wire up my ac compressor, dash knobs, and pressure switches all together? A write up if someone has a link would be greatly appreciated.
|
|
|
Post by Stinger on Sept 12, 2018 22:32:35 GMT -5
Going to need to duplicate a stock harness, the AC portion anyway. Most of it should still be under your dash as PiMP harness only repairs engine harness.
|
|