|
Post by lakenheath24 on Feb 4, 2019 10:47:16 GMT -5
Hi all,
CAn someone point me to a thread on this. I have been searching or an hour!
I have an 88TC with a 2.3T. I have the PiMP XS and I am wanting to ditch the VAM. I was looking for info on what all parts are needed, if any, besides a MAF and connector. I have a 60MM throttle body. I have a bunch of mods, I will post if needed, but just wanted to find an existing thread if poss.
Thanks.
|
|
|
Post by Stinger on Feb 5, 2019 2:44:32 GMT -5
No thread exists because you don't need to do anything to ditch the VAM with a PiMPxs except install the ECU and remove the VAM (and follow the startup guide).
This is not MAF, it's SD but there is no practical reason to run MAF, especially right from the start. There is not a single PiMP customer out there running a MAF that I'm aware of (though a lot claimed they would want to but they all start SD and never find a reason to add the extra expense/complication after trying SD).
|
|