|
Post by strangesvo on Mar 28, 2021 7:59:13 GMT -5
I'm in the middle of my 120° intake mock up and know I have to shorten the throttle cable. I have an extra and noticed the cable only goes through the fire wall couple inches. So what's the best way to shorten the throttle cable? Maybe there's a write up already, just looking for what others have done.
Thanks
84 SVO
|
|
|
Post by Stinger on Mar 28, 2021 12:44:11 GMT -5
Many others just loop the cable to take up the slack.
|
|
|
Post by strangesvo on Sept 5, 2021 21:26:46 GMT -5
Finally getting around to this project and i wanted to revisit this post. Yeah I just did a round about loop and the cable still works good. I guess I was worried it would kink but it didn't. Stock cable works fine.
|
|