|
Post by Stinger on May 6, 2010 14:36:51 GMT -5
I need a few T3 exhaust outlet elbows, they can have broken studs, stripped 02 sensor holes, etc. Just as long as the flange and flapper assembly is good. You should be able to ship them for 7-10 dollars so please PM with with a shipped price. I'll take as many as you can provide and you can use it for store credit or just get cash for them. Thanks.
PM me if you've got one you want to get rid of, I don't check this thread very often.
|
|
DRD
Boosting 10 psi
Posts: 44
|
Post by DRD on May 20, 2010 22:04:06 GMT -5
How much are you paying? Not including the shiping!
|
|
|
Post by Stinger on Jun 9, 2010 2:53:34 GMT -5
Typically I give $15-20 before shipping for the first one and then an additional $15 for each additional (since shipping doesn't go up).
|
|
|
Post by capri383rs on Jul 31, 2010 0:29:15 GMT -5
i have 2 of them im not using,i need some intercooler piping to do a 90 degree upper on you fmic kit
|
|
|
Post by bobbarker on Aug 14, 2010 17:52:05 GMT -5
You want a down elbow and pipe w/ stock cat too? I'll trade you for a t-shirt and stickers! Can you make the 1/4 window stickers that say "www.stinger-performance.com" in black lettering?
|
|
|
Post by Stinger on Aug 15, 2010 15:27:06 GMT -5
Bob, I can make the stickers in black but you won't be able to see them if you use them on glass.
|
|
|
Post by bobbarker on Aug 15, 2010 15:57:47 GMT -5
I know, I had some in black on my Mach and they were hard to see unless you were looking close at the car. I kinda like that little suprise/subtle touch to things.
|
|
|
Post by Stinger on Jan 8, 2013 17:24:29 GMT -5
I'm going to open this back up. I'm out of elbow cores and need some more.
|
|
::m::
Boosting 10 psi
Posts: 26
|
Post by ::m:: on Jan 9, 2013 10:49:53 GMT -5
I have a spare one in perfect condition. Wanna trade something?
|
|
|
Post by Stinger on Jan 10, 2013 23:30:04 GMT -5
Trade, store credit, cash, whatever works for you. I'll send a PM.
|
|
|
Post by McCool93fox on May 10, 2013 12:49:52 GMT -5
Are you still wanting these?
|
|
|
Post by rogerthat93tranger on Aug 2, 2013 19:30:36 GMT -5
i have one with studs intact and o2 senor still good if u want it
|
|
|
Post by Stinger on Aug 12, 2013 16:40:51 GMT -5
I'll always be willing to take these off your hands. Just send a PM if you're ready to get rid of them. I don't check this thread very often.
|
|
|
Post by Stinger on Jun 19, 2018 18:20:23 GMT -5
I need more of these if anyone has any...
|
|
|
Post by perri2300 on Apr 9, 2020 12:16:08 GMT -5
I have one I could ship out next week if you are still taking them. I need one of your Microsquirt serial port to USB adpters, or your t3 turbo flange that I could put a V-band on.
|
|