Center Mount Turbo Exhaust Manifold

[markt]

I am building a custom Volvo 122S and I'm using a 2.3L Turbo and drivetrain from a 1988 T-bird for power. I have the engine mounted but I have a conflict between the turbo and the cowl. I have already cut and modified the cowl and I don't want to do it again. I  believe your Center Mount Exhaust Manifold will fix the problem but I need measurements on what the total width of it is from the flange at the head to the outer edge of the turbo flange and what height the turbo flange is relative to say the top row of bolts at the head. That should allow me to take some measurements and see if it will fix my problem. I sure hope it does. Can you help? Thanks.

[Stinger]

The measurements are listed in the web store header listing:

Dimensions:
-Total Width (Exc. WG Flange): 8.0"
-Total Width (Inc. WG Flange): 9.75"
-Total Height: 8.0"

The first measurement is from the head to the outer edge of the turbo flange (what you asked for). The second is the widest point (the outer edge of the WG flange). The turbo flange is 1" below the top of the head flange.

[markt]

Thanks Stinger. My bad. I missed that when I looked at the part. I will do some measuring and get back with you. Thanks.