|
|
Post by ianb on Jul 9, 2014 16:00:10 GMT -5
Just wanna make sure I understood this right..can I run the Single Piston Blow Off Valve Type RFL with the Silicone 2.5" Coupler with 1.0" Tee Adapter for Adding a BOV/BPV ? I know ill need clamps obviously. I noticed it said in the directions you can drill a 1" hole and line it up in the tubing. However could you use this coupler to connect 2 pipes instead?
|
|
|
|
Post by Stinger on Jul 9, 2014 16:24:53 GMT -5
The RFL is 1.25" and uses a special flange with a retainer groove (included with the BOV) that has to be welded to the pipe. The other two valves we have listed are 1", work with the tee, and can be used to connect two pieces of pipe, or drill the 1" hole and slide over.
|
|
|
|
Post by ianb on Jul 9, 2014 17:12:58 GMT -5
Gotcha thanks. Would I have any issues with the pimp if I ran either the hybrid or bypass valve instead? I'd rather have that than the obnoxious sound lol.
|
|
|
|
Post by Stinger on Jul 9, 2014 22:10:32 GMT -5
You can run whatever BOV you want with the PiMP, there are no restrictions regarding which you can use since you don't have a VAM now.
|
|
|
|
Post by ianb on Jul 24, 2014 15:34:31 GMT -5
Stinger im looking at the fmic volvo piping/couplers/tbolts kit as I already have the Volvo front mount. If I order it with a "Bung Only" will that mean it comes with a intercooler pipe welded with the RFL fitting on it?
|
|
|
|
Post by Stinger on Jul 24, 2014 19:36:25 GMT -5
If you order an RFL BOV with it, yes.
|
|
