|
Post by Hueneme805 on Nov 18, 2017 23:57:30 GMT -5
Gonna reseal exhaust manifold and turbo which works better. Just wanted to hear pros and cons of both ways.?
|
|
|
Post by Stinger on Nov 19, 2017 1:38:51 GMT -5
Factory was metal to metal between head and manifold. This is best if surfaces are flat. Turbo to manifold uses a steel gasket.
|
|
|
Post by Carl on Nov 19, 2017 9:22:19 GMT -5
Race Car Solutions sells a very good quality T3 gasket. A little thicker than the felpro one and can deal with imperfections a little better.
|
|