|
|
Post by reaper5lm on Oct 13, 2009 17:36:43 GMT -5
Hi, I am having problems with my Distributor again. I replaced it with a new replacement part from Orielly's about 6 Months ago. Now it back to the same, It will start Fine and will run decent till it warms up the it start jerking some like the sparks cutting off. And after it get's up to temp it doesn't want to start I have to crank it about 4-5 times to get it to fire again. I know it Heat kills them and I probable hurt it to. lol... On an other note I can hear the Dist. making a clicking noise, When I put the key forward any Ideas?
|
|
|
|
Post by Stinger on Oct 13, 2009 19:54:59 GMT -5
Clicking in the forward position just means the engine is lined up to spark. You may need to replace the TFI, PIP, or distributor again.
|
|
|
|
Post by reaper5lm on Oct 13, 2009 20:00:06 GMT -5
I just ordered a replacement for the Dist. I have a tfi laying around that I'll try tommorow. What I would like to know is a Napa replacement better? Or can I put better part's in the Dist?
|
|
|
|
Post by Stinger on Oct 13, 2009 22:35:42 GMT -5
I'd run a factory stock one before a "parts store" unit.
|
|
|
|
Post by reaper5lm on Oct 14, 2009 11:11:51 GMT -5
well I am going to have to go with the replacement for now. I turned in my original for a core.  I'll look for another one to rebuilt. Thanks, |
|
