|
Post by coreydaniel on Feb 10, 2010 21:21:53 GMT -5
I am putting a new combo together. Im hoping for 300whp. Fresh short block Ported and polished head Knife edged and polished intake, homemade upper 75mm throttle body Hy35, 20psi mildly ported E6 Boport 1.5 cam Megaquirt and 75lb injectors I made 242whp and 318ft/lbs with the same turbo and totally stock everything else. So im hoping the $1,500 i just spent puts me in the 300whp range.
|
|
|
Post by turbo23240sx on Feb 10, 2010 22:19:21 GMT -5
I'm no expert but I would think you might be close to that. The real question is how fast do you want to go? Dyno numbers are just that and can vary very much and should be used for tuning.
|
|
|
Post by Stinger on Feb 11, 2010 0:15:29 GMT -5
There are a lot of variables in this (what the head flows, whether it got new valve seats, how well the intake flows, how well the e6 flows, what exhaust, how good is the tune, etc.) but in general, it could make anywhere between 250-330rwhp at that boost level.
|
|