|
|
Post by mobird on Sept 14, 2021 12:31:43 GMT -5
Hey guys I have a link for a cheap b234 volvo head and was wondering if I can use the PIMP with that head With the stinger Cam angle sensor in the tfi distributor and coil packs? Or do I have to run the volvo distributor? I apologize if this is a stupid question or posted in the wrong section...its an 88 tbird TC I'm working on
|
|
|
|
Post by Stinger on Sept 14, 2021 13:35:56 GMT -5
The ECU isn't affected by head choice so no problem there. CAS/Ford Distributor is fine too as long as it clears whatever intake you are going to run.
|
|
|
|
Post by mobird on Sept 14, 2021 14:45:39 GMT -5
The ECU isn't affected by head choice so no problem there. CAS/Ford Distributor is fine too as long as it clears whatever intake you are going to run. Thank you very much....time for pick up that volvo head |
|
|
|
Post by wesk on Oct 6, 2021 7:50:12 GMT -5
FYI, the highest hp FOlVO uses PimpXS with our CAS.
|
|
