|
|
Post by dsrtjeeper on Oct 13, 2024 12:58:10 GMT -5
Hi guys. Do you have access to new 60 pin female (Harness end) plug kits? This is for a PIMPXS and re-pinned '94 Mustang GT.
|
|
|
|
Post by Stinger on Oct 14, 2024 12:08:20 GMT -5
They aren't something that's available at the consumer level as far as I know. They are sort of limited qty's available so companies won't sell them individually when they can make a harness with them instead. You can certainly grab one from any salvage mid 80's to mid 90's Ford if yours is broke/cracked or something. I see used ones on eBay any time I look for around $35 under "EEC-IV connector pigtail".
|
|
|
|
Post by dsrtjeeper on Oct 14, 2024 12:49:25 GMT -5
The bad part is that the older ones are brittle. If one breaks during the re-pin of nearly 60 wires; I'm screwed. There use to be a seller on eBay that sold new ones but they no longer list them. My current plug has at least 3 broken tabs that lock in the pins. I'll keep searching. Thanks!
|
|
|
|
Post by Stinger on Oct 14, 2024 14:14:41 GMT -5
They can be brittle but I've never broke one. The locking tab barely has to move to remove a pin. I think people often push the tab much farther than necessary and that's what causes the problem (other than extreme cases where any movement breaks it off).
|
|
|
|
Post by dsrtjeeper on Oct 14, 2024 16:44:40 GMT -5
You're probably correct.
My vision isn't what it use to be so it's very difficult to see those tabs. Thanks!
|
|
