radguy
Boosting 15 psi
Posts: 72
|
Post by radguy on Dec 3, 2010 16:07:58 GMT -5
I have a few things I don't need for the current build.
Holset HE351 - No issues - $250 Ported 4 square lower - $100 Autozone reman PE ecu - $100 (4)42lb/hr high Z injectors - $75 (4)35lb/hr brown tops - $35 Gutted rotated upper with 60mm tb - $60 Accell DFI gen 6 - $200 Stock inline upper, lower, fuel rail - $60 Stock 4 square upper - $20 Large Vam - $50 93 Ranger serp set up - $150
I am looking for a 3" T-3 elbow, 3" down pipe, 3" exhaust, LC-1 or equivalent, 4 lug wheels
Dan
|
|
|
Post by immloki on Dec 3, 2010 20:29:14 GMT -5
Is the upper 90 or 120 rotated
|
|
radguy
Boosting 15 psi
Posts: 72
|
Post by radguy on Dec 3, 2010 22:27:57 GMT -5
90
Dan
|
|
|
Post by sandmantiny on Dec 6, 2010 11:55:48 GMT -5
accell dfi set up, what all dose it come with? pics?
|
|
radguy
Boosting 15 psi
Posts: 72
|
Post by radguy on Dec 6, 2010 19:26:31 GMT -5
What is your email sandmantiny? It comes with the ECU, a tuning book, a GM MAP, Ford installation instructions, partial wiring harness and ford pig tails.
Dan
|
|
radguy
Boosting 15 psi
Posts: 72
|
Post by radguy on Dec 6, 2010 19:28:00 GMT -5
Turbo, inline intake, 4 square upper and rotated upper/tb are sold.
Dan
|
|
|
Post by redhead706 on Sept 1, 2011 17:51:28 GMT -5
do you still have the vam very interested
|
|
|
Post by n20capri on Sept 4, 2011 12:51:27 GMT -5
Interested in the Serp setup...is it 100% complete for an 86 SVO swap? Pics? Thanks
|
|