Post by zrolls on Feb 15, 2011 16:55:33 GMT -5
Hello Everyone, well i hate to do this, since i've been layed off of work i need some money.
I'm selling my 2.3 SVO Ported head with Stainless Steel Valves.
I'll give you as much information on this as i can.
1.) Bought the Head from a fellow that Had majority of the work Done to it At EIP Tuning In Westminster, Md. ( had majority of the port work done, installed the valves/springs ect. did the -o-rings with stainless steel wire .043)
2.) after i bought it , i brought it to my local machine shop guy ( AHM Performance) to comb it over with a fine tooth to make sure that this will be ready to go.
AHM Also did a Competition Valve job on it, did more valve bowl porting, put in new seals and freeze plugs and misc labor to clean it and make sure everything was correct.
Valve sizes are intake: 1.89"/ Exhaust 1.59"
Also has Hardened steel Valve Seats
and a 3 Angle Competition Valve Job.
And Smoothed combustion chambers.
does not come with a camshaft or rocker arms..
Selling for 750.00 OBO ( and i prefer local pickup) SOLD!
and the head is ready to be run with no extra work needed.
spend a good amount of money on her to make sure everything is correct and looking to get my money back from her to pay some bills.
if you need anymore pics let me know...
1.) entertainment.webshots.com/photo/2188160670104098422NpmpcY?vhost=entertainment
2.)
entertainment.webshots.com/photo/2237658080104098422snkMsi?vhost=entertainment
3.)
entertainment.webshots.com/photo/2378592450104098422xCovOm?vhost=entertainment
4.)
entertainment.webshots.com/photo/2071096180104098422EoGiCL?vhost=entertainment
5.)
entertainment.webshots.com/photo/2482592280104098422mGIkgU?vhost=entertainment
6.)
entertainment.webshots.com/photo/2405079850104098422xUAPJT?vhost=entertainment
7.)
entertainment.webshots.com/photo/2855185180104098422Uguphv?vhost=entertainment
email me at mzirrolli@yahoo.com ( i check this email 4 times a day , i do not check my pm box too often. )
Thank you guys and best of luck to the first person who sees this.!
I'm selling my 2.3 SVO Ported head with Stainless Steel Valves.
I'll give you as much information on this as i can.
1.) Bought the Head from a fellow that Had majority of the work Done to it At EIP Tuning In Westminster, Md. ( had majority of the port work done, installed the valves/springs ect. did the -o-rings with stainless steel wire .043)
2.) after i bought it , i brought it to my local machine shop guy ( AHM Performance) to comb it over with a fine tooth to make sure that this will be ready to go.
AHM Also did a Competition Valve job on it, did more valve bowl porting, put in new seals and freeze plugs and misc labor to clean it and make sure everything was correct.
Valve sizes are intake: 1.89"/ Exhaust 1.59"
Also has Hardened steel Valve Seats
and a 3 Angle Competition Valve Job.
And Smoothed combustion chambers.
does not come with a camshaft or rocker arms..
Selling for 750.00 OBO ( and i prefer local pickup) SOLD!
and the head is ready to be run with no extra work needed.
spend a good amount of money on her to make sure everything is correct and looking to get my money back from her to pay some bills.
if you need anymore pics let me know...
1.) entertainment.webshots.com/photo/2188160670104098422NpmpcY?vhost=entertainment
2.)
entertainment.webshots.com/photo/2237658080104098422snkMsi?vhost=entertainment
3.)
entertainment.webshots.com/photo/2378592450104098422xCovOm?vhost=entertainment
4.)
entertainment.webshots.com/photo/2071096180104098422EoGiCL?vhost=entertainment
5.)
entertainment.webshots.com/photo/2482592280104098422mGIkgU?vhost=entertainment
6.)
entertainment.webshots.com/photo/2405079850104098422xUAPJT?vhost=entertainment
7.)
entertainment.webshots.com/photo/2855185180104098422Uguphv?vhost=entertainment
email me at mzirrolli@yahoo.com ( i check this email 4 times a day , i do not check my pm box too often. )
Thank you guys and best of luck to the first person who sees this.!