|
|
Post by Dan on Nov 2, 2011 23:48:41 GMT -5
Do you know the dish volume of the CP Volvo pistons you're selling?
|
|
|
|
Post by Stinger on Nov 2, 2011 23:59:22 GMT -5
It's the same as the stock turbo pistons. I'd have to dig to find the actual number. Let me know if that is sufficient or you need me to dig...
|
|
|
|
Post by Dan on Nov 3, 2011 10:29:43 GMT -5
Stock is 10cc, these look alot bigger though. It would be good to know for sure though, so I know if they'll work or if I need custom ones.
Thanks
|
|
|
|
Post by Stinger on Nov 3, 2011 15:38:27 GMT -5
CP is at SEMA right now so I can't confirm the exact measurement. I thought it was 13cc though (stock and CP). Did you measure the stock piston or read it on the net that they are 10cc?
|
|
|
|
Post by Dan on Nov 3, 2011 20:13:37 GMT -5
I havn't measure them. I read somewhere on TF they are 10.3cc?
|
|
|
|
Post by Stinger on Nov 3, 2011 22:22:34 GMT -5
Ok, well If you can wait until next week, I can get the actual number from CP.
|
|
|
|
Post by Dan on Nov 4, 2011 17:41:11 GMT -5
Thank you, I appreciate that  |
|
|
|
Post by Stinger on Nov 7, 2011 16:16:42 GMT -5
The CP rep still isn't back from SEMA...will try again tomorrow.
|
|
|
|
Post by Stinger on Nov 14, 2011 20:25:52 GMT -5
Finally got info from CP. Our Volvo Pistons have a dish of 27cc to get the compression down to a turbo friendly 8-8.5:1.
|
|
