|
|
Post by 72capri on Jan 15, 2012 15:25:26 GMT -5
I just bought an 88 TC. I am only gonna use the engine {trans was bad and is not in car }so if anyone wants to buy anything off of the body {whole car less engine & trans if you want} just let me know. I'll have it for a few weeks the it will go to the scrap yard.
|
|
|
|
Post by shizznizz980 on Jan 15, 2012 22:23:43 GMT -5
location?
|
|
|
|
Post by 72capri on Jan 16, 2012 5:36:05 GMT -5
Windsor, NC 27983
|
|
|
|
Post by shizznizz980 on Jan 16, 2012 14:34:08 GMT -5
dang, was interested in the rear end. That would be to expensive to get to FL
|
|
|
|
Post by 72capri on Jan 16, 2012 19:36:50 GMT -5
Thats a bit far to send a rear end. After talkin it over with my buddy last night i think i'm gonna use the rear anyhow.
|
|
|
|
Post by shizznizz980 on Jan 17, 2012 0:26:01 GMT -5
I would use it, thats a sweet rear end straight from factory.
|
|
|
|
Post by kashcraft on Jan 17, 2012 12:05:32 GMT -5
How about the console?
|
|
|
|
Post by taylor85tc on Jan 17, 2012 16:33:13 GMT -5
what kinda shape is the hood and intercooler in i have an 85 tc im working on
|
|
|
|
Post by 72capri on Jan 17, 2012 19:51:53 GMT -5
I took a peek inside the car but didn't pay much attention. I will have it here at the house this weekend so i can tell you more in detail. Best i remember the hood is strait but the whole car has the paint/clearcoat peeling like they all typically do. The engine was running when parked bout 3 years ago
[ auto tranny died ] so intercooler should be fine.
]
]
|
|
|
|
Post by turbojack on Jan 30, 2012 12:55:45 GMT -5
am looking for a t5 bellhousing w/hyd cyl and attaching brackets,,you said trans was bad,but how bout the bell ?
|
|
|
|
Post by 78stang2 on Apr 20, 2012 20:51:58 GMT -5
Im looking for a ECU harness, throttle cable, large vam, and Upper manifold from a 87-88 TC. Let me know if you want ot sell any of those parts. Also the premium regular switch.
|
|
|
|
Post by 72capri on Apr 21, 2012 17:27:15 GMT -5
Sorry 78..the car is gone. All i have is the engine and it turned out to be a ford remanufactured which is bored .030 and it has an 84 model head so none of which is any good for my build.
|
|
