3inch Midpipe

[filasfinest86]

hey stinger i was wondering the options you have for a 3 inch mid pype and the prices? in particular A Y-pipe and then a single drivers side midpipe in stainless and aluminized..i havent made up my mind..please and thank you< i didnt see just midpipe prices on your page...
here is what im thinkin for my car sorry for the pic it looks like a third grader made it

Your 3 inch midpype stainless or alum
One single muffler on the drivers side 3in in two 2.5 out( FLOWY SERIES 10)
custom make a crossover pype after the muffler
then use LRS 2.5 stainless tailpypes

not opting for a dual muffler setup because my A1000 fuel pump is in the way where a pass side muffler would go
thanks for your help
derek

[Stinger]

$240 shipped for the stainless midpipe.

I used to have an exhaust system like that back when my 91LX was n/a. I will say it is VERY difficult to get two 2.5" tailpipes over the axle/between the axle and upper control arm. There is also minimal room between the axle/antiroll bar/fuel tank to cross it over. I actually used 2.25" pipe to make it a little easier and it was still a royal pain (even with a full exhaust shop with tubing bender at my disposal at that time).

[filasfinest86]

okay $240 works for me. I have a fuel cell so that should help with the tail pypes i hope and also no sway bar.

[Stinger]

The fuel cell will help with the pipes AFTER the axle, won't make any more clearance between the upper control arm and the axle though. I hope you have tubular control arms, that gets you a little more clearance.

[filasfinest]

okay how do i pay for this pay pal?
also could i diconnec t the shock and get a little bit more play i need to replace them any how..

[Stinger]

Paypal to Sales (at) Stinger-Performance.com with a note stating it's for a stainless driver's side midpipe. The $240 shipped is for the US, not Canada (no idea where you are).