|
|
Post by fairmont on Oct 18, 2012 8:29:26 GMT -5
Are the Cp pistons strong enough for alot of boost and nitrous!
Thanks!
Dan
|
|
|
|
Post by Stinger on Oct 18, 2012 10:47:27 GMT -5
Yes
|
|
|
|
Post by fairmont on Oct 18, 2012 12:26:11 GMT -5
Would it be better to run the .030 over piston with a half fill block? or .030 would just be fine?
|
|
|
|
Post by Stinger on Oct 18, 2012 13:56:09 GMT -5
I'd run .020 over without a fill, .030 "could" be OK without a fill but I'd do a half fill if at all possible. We saw a guy at the "Largest 2.3T Race" last month split his .030" block in the #3 cylinder while only running 12's.
|
|
|
|
Post by fairmont on Oct 18, 2012 14:07:40 GMT -5
Im asking because one of my piston skirt broke! and i dont think a .020 over would be enough to fix. or i guess i can use one of my empty block with my crower rods and .010 over Cp pistons.
|
|
|
|
Post by Stinger on Oct 18, 2012 17:22:13 GMT -5
It's rare that .010 will clean up the bores, even in a running shortblock.
|
|
