|
|
Post by dpdisxr4ti on Apr 15, 2009 14:32:09 GMT -5
Shannon- Is your stuff -10 or -8? Reason I ask is that I've got some -10 fittings for the pan, but I'm thinking your stuff is -8.
Does anyone make a -10 flange that goes right to the turbo, so I can avoid the adapters up top entirely?
|
|
|
|
Post by Stinger on Apr 16, 2009 1:30:56 GMT -5
Header returns are -10, stock returns are -8. Our fittings are 1/2" NPT and the first fitting adapts from 1/2" NPT to the proper line size. I've seen some AN style male return fittings on eBay I think.
|
|
|
|
Post by dpdisxr4ti on Apr 16, 2009 9:11:44 GMT -5
Header returns are -10, stock returns are -8. That clears things up. I've got a stock location line here already, and I was wondering why it had smaller fittings than the one that was already in the pan (from another short block I have that had been used with a pan return). Just need to figure out which of the 6 different ways I'm going to plumb the return now. ;D |
|
|
|
Post by dpdisxr4ti on Apr 16, 2009 17:30:55 GMT -5
|
|
|
|
Post by Stinger on Apr 19, 2009 23:13:55 GMT -5
Yes, they are proud of them for sure!
|
|
