stm356
Boosted Newbie
Posts: 6
|
Post by stm356 on May 14, 2013 8:42:32 GMT -5
I purchased a center mount header and am having trouble installing it. My stock header bolts are too long and the heads of them are too wide. Does anyone have any recommendations on what bolts to get for it and where I can get them from?
Thanks
|
|
|
|
Post by Stinger on May 14, 2013 12:32:37 GMT -5
10mm X 1.5 x 35-40mm long Class 12.9 Metric Blue Allen Head bolts. You should also use some small washers, a few of which may need to be ground down a bit to clear the tube next to the bolt.
|
|
stm356
Boosted Newbie
Posts: 6
|
Post by stm356 on May 15, 2013 13:02:47 GMT -5
Thank you. I was getting really frustrated with it the other day and I got these last night. Went on with no problems. Thanks again.
|
|
