rcfts
Boosting 25 psi
Posts: 128
|
Post by rcfts on Jun 4, 2013 11:22:15 GMT -5
good morning . just a quick question about your 3 inch exhuast that i have already purchased for my 91 mustang. im getting ready to put it on and have noticed ther is not any hangers, do i cut off the old ones from the stck exhuast and reuse them? are just two suport locations enough( in the stock locations).
thanks in advance , Chris
|
|
|
|
Post by cupton79 on Jun 4, 2013 12:19:02 GMT -5
yes, you reuse the stock hangers, there should be 3, one under the tranny cross member, one at the back of the muffler and one near the end of the tailpipe.
|
|
stm356
Boosted Newbie
Posts: 6
|
Post by stm356 on Jun 17, 2013 10:51:44 GMT -5
Has anyone had any clearance issues with the 3 inch exhaust downpipe? I got it in Saturday and went to install it yesterday but it is running into the coolant lines coming out of the car on the back of the engine bay. I can force it in there but then the exhaust and the line are touching.
|
|
|
|
Post by Stinger on Jun 17, 2013 20:54:57 GMT -5
Which 3" downpipe? What vehicle?
|
|
stm356
Boosted Newbie
Posts: 6
|
Post by stm356 on Jun 17, 2013 22:17:20 GMT -5
Sorry, should have included that in the original message. The center mount header 3 inch downpipe on an 84 mustang gt turbo.
|
|
|
|
Post by Stinger on Jun 17, 2013 22:45:51 GMT -5
Is this the internally gated header DP I shipped last week?
|
|
stm356
Boosted Newbie
Posts: 6
|
Post by stm356 on Jun 18, 2013 16:12:58 GMT -5
yes it is
|
|
|
|
Post by Stinger on Jun 18, 2013 17:46:48 GMT -5
Email me a few pics of the issue please.
|
|
