|
Post by psrumors on May 5, 2009 21:46:10 GMT -5
Do you sell turbos and if so, what would you recommend for my setup?
Stinger FMIC 75lb inj e6 (mildly ported) inline intake MeqaSquirt 2 Extra Stock Turbo BoPort 1.5 Stinger 3" Down pipe and exhaust
The car is an '84 GT Turbo full weight with a complete Maximum Motorsports Suspension system with coilovers TQ arm etc. Brakes are basicly the FMS 2300 kit.
I am building a good all around car capable of hitting the drag strip, road course and street. Hopefully the car will be able to run mid 12s in the quarter.
|
|
|
Post by Stinger on May 5, 2009 22:43:42 GMT -5
A stock T3 will support enough power to go mid 12's and be the most fun at that power level. It should be super responsive and such and give a lot of "area under the curve". I wouldn't really advise upgrading until you are close to maxing it out (around 300rwhp). At that point, an SC50 (or equivalent non-chinese 50 trim hybrid) would be a great choice and support up to 425rwhp or so.
Oh, and no we don't sell turbos.
|
|