|
|
Post by cody wise on Apr 3, 2015 13:03:03 GMT -5
I have a built c4 with reverse manual vb and transbreak out of my drag truck with 347 that i am wanting to put in my 86 svo where can i get a bell housing or adapter to do this what is everyones thoughts on doing this at all
|
|
|
|
Post by svojohn on Apr 3, 2015 21:59:21 GMT -5
You can use a factory Pinto 2.3 bell housing or you can buy one from Lakewood. A factory replacement flexplate can be purchased at any parts house for cheap or you can buy a billet one from reactorproducts.com. A cheap but good convertor can be had from dirtydogperformance.com or you can contact coanracing.com.
|
|
