jet1
Boosting 20 psi
Posts: 85
|
lifters
Jul 2, 2009 19:48:44 GMT -5
Post by jet1 on Jul 2, 2009 19:48:44 GMT -5
Hey everyone. I was wondering what kind of lifters are you guys running with roller cam setups. I currently have melling. I am starting to get some noise from them. How about stock. Is there a big difference versus all these other brands? ANy input on this and and specs for shimming would be appreciated. I will have it at a shop saturday.
|
|
|
Post by Stinger on Jul 3, 2009 0:57:22 GMT -5
What's the lift on the cam?
I haven't found any great difference between the brands.
|
|
jet1
Boosting 20 psi
Posts: 85
|
Post by jet1 on Jul 8, 2009 5:33:55 GMT -5
0.505
|
|
|
lifters
Jul 8, 2009 10:29:21 GMT -5
Post by Stinger on Jul 8, 2009 10:29:21 GMT -5
What have you done geometry wise to make sure the cam to follower geometry is correct? You can't safely go over about .450 lift without geometry issues with stock valve length and lifter height.
|
|
|
lifters
Jul 8, 2009 10:47:30 GMT -5
Post by Matt Culpepper 2300gearjammer on Jul 8, 2009 10:47:30 GMT -5
is that the actual lobe lift or is that the amount lift after the follower ratio gets multiplied?
|
|
|
lifters
Jul 8, 2009 19:03:43 GMT -5
Post by Stinger on Jul 8, 2009 19:03:43 GMT -5
I would assume that's the actual valve lift, probably the modern performance cam.
|
|
jet1
Boosting 20 psi
Posts: 85
|
lifters
Jul 8, 2009 20:59:45 GMT -5
Post by jet1 on Jul 8, 2009 20:59:45 GMT -5
yeah, It is the modern performace cam. Nick Mannarino in west long branch.
|
|
|
lifters
Jul 8, 2009 22:22:04 GMT -5
Post by Stinger on Jul 8, 2009 22:22:04 GMT -5
That's too bad lol!
|
|
jet1
Boosting 20 psi
Posts: 85
|
lifters
Jul 10, 2009 5:36:26 GMT -5
Post by jet1 on Jul 10, 2009 5:36:26 GMT -5
OH, It is better than any came i used so far. But dont get me wrong. I learned from my mistakes. Nick is all about the money. And I wish i would have known about his shobby work. We dont talk anymore. He left me a mess after about 5 grand 6 months ago. WHat is done is done.
|
|
|
lifters
Jul 10, 2009 9:36:04 GMT -5
Post by Stinger on Jul 10, 2009 9:36:04 GMT -5
Yes...he's a real con artist...
|
|