|
Post by turbo23240sx on Jul 13, 2009 20:47:08 GMT -5
I am going to swap my a4ld for a t5 and was wondering if i can use a 5.0 pedal assembly, crossmember, and driveshaft? I measured the driveshaft and it appears the 5.0 length will work. It also appears the trans mount is in the same location so the 5.0 crossmember will work. I am doing the swap soon and just want to make sure i get the correct parts. The clutch cable has a different part number than the 5.0 so i ordered the correct one, but can i use the quadrant and firewall adjuster for a 5.0? Thanks!
|
|
|
Post by Stinger on Jul 13, 2009 22:28:14 GMT -5
Yes to the pedals, crossmember, driveshaft, quadrant, and firewall adjuster.
|
|
|
Post by turbo23240sx on Jul 13, 2009 23:51:59 GMT -5
Thanks for the help stinger. I have a line on the parts cheap so i cannot wait to bag this delayed shifting A4LD!
|
|
|
Post by Stinger on Jul 14, 2009 0:23:27 GMT -5
I don't blame you...feels like you pick up 30-40hp when you swap to a T5.
|
|