|
|
Injector ?
Jun 10, 2017 21:34:10 GMT -5
via mobile
Post by redroc on Jun 10, 2017 21:34:10 GMT -5
I'm ready to pull the trigger on a pimp. I'm going to need new injectors. My goals with the car would be 300 to 350 hp in the end. Right now the car has ported Ranger head, gutted intake ported e6, t3 turbo, block bored 20 over. I will also need a fuel pump. Will there be something that I could do now that would work and give me room to grow (injector wise ). What are the recommendations?
|
|
|
|
Post by Stinger on Jun 10, 2017 21:52:24 GMT -5
Our 60lb high impedance Siemens injectors would work well.
|
|
|
|
Injector ?
Jun 10, 2017 22:32:26 GMT -5
via mobile
Post by redroc on Jun 10, 2017 22:32:26 GMT -5
What would you recommend for a fuel pump?
|
|
|
|
Post by Stinger on Jun 10, 2017 22:52:10 GMT -5
I don't know what vehicle this is so I don't know what type of pump it needs.
|
|
|
|
Post by redroc on Jun 11, 2017 8:08:40 GMT -5
89 2.3t mustang. Stock tank, fuel lines,fpr,and rails. Also forgot to add in my original post. The car has a npr intercooler and 355 gears.
|
|
|
|
Post by Stinger on Jun 11, 2017 11:36:27 GMT -5
A Walbro 255lph high pressure in tank pump is what you need. We sell these but they aren't on our site.
|
|
