PIMPX install in 1985 Ford EXP Turbocoupe

[Sal]

Hey Stinger,
I am currently beginning the PIMPX install and well I started a post on my old FEOA forum. I was wondering if you're ok with this before I go on any further. If you're cool with it I will proceed and of course I will not be bashful towards you guys. If you have any issues with this please let me know. Here is the link to the post and I am looking forward to finishing the install.

www.feoa.net/threads/1985-epimpxp-t3-turbocoupe.105841/

[Sal]

Sorry stinger, this is Expturbocoupe. I wasn't familiar with the way this works. The guest name be changed?

[Stinger]

It's fine.

You aren't logged in, hence the name change.

It will auto tune idle, especially with stock cams. We just suggest you fine tune it following our instructions to get it perfect and stable.

[expturbocoupe]

Jul 6, 2017 16:55:14 GMT -5 Stinger said:

It's fine.

You aren't logged in, hence the name change.

It will auto tune idle, especially with stock cams. We just suggest you fine tune it following our instructions to get it perfect and stable.

Oh cool! Thanks for that. I was reading a thread here somewhere where someone said you can't auto tune idle. I suppose it's because the user didn't have a stock cam. Thanks for clarifying that.

[Stinger]

Yeah, big cams all like different AFR's and until you know that AFR, you can't configure auto tune to dial it in to that AFR. Once you've found out what AFR your cam likes, you've already got idle tuned so there is no need to auto tune. Doesn't matter, only takes a few minutes to tune warm idle either way.