|
Post by tutulate on Jan 18, 2018 22:36:16 GMT -5
I am installing a BPV on a stock SVO intercooler system w/VAM, and want to know how folks attach the return to the turbo inlet. I was thinking of drilling and tapping the aluminum inlet elbow for a 3/4NPT-to-1" barb fitting.
|
|
|
Post by Stinger on Jan 19, 2018 15:02:05 GMT -5
You can do it that way if you want it to be a non-reversible method. Most people will take a small piece of 3" pipe and put the port in that, then clamp that between the stock VAM hose and a coupler on the VAM, allowing it to be removed in the future.
|
|
|
Post by tutulate on Jan 19, 2018 15:11:52 GMT -5
Ah,..I see. That makes more sense. I have some left over exhaust pipe I can use! Thanks, Shannon!
|
|