|
Post by 93stangnow23t on Nov 2, 2009 18:54:23 GMT -5
OK I bought another pcv valve but how do you install it? Do you put it in the black canister? or what?
|
|
|
Post by 93stangnow23t on Nov 2, 2009 19:41:21 GMT -5
Never mind I figured it out with help from 93lxturbo.
|
|
|
Post by Stinger on Nov 2, 2009 23:58:55 GMT -5
For future reference, you remove the stock pcv valve from a hose that connects between the bottom of the intake and a canister on the driver's side rear of the block a few inches above the oil pan rail. Pull the 90 degree fitting off the top of the new pcv valve (if it has one), then insert the new valve in the line.
|
|
|
Post by 93stangnow23t on Nov 3, 2009 17:44:18 GMT -5
My old one wasn't bad anyway so I don't know.
|
|