|
Post by immloki on Nov 5, 2009 10:57:57 GMT -5
I am about to perform a swap into a 91 stang. I have an 88tc motor to swap in. I have acquired two computers for it and was curious as to which would be the better swap.
One is a LA2, the other is an LB3.
Is there a major difference between the two? I know the LA2 is for a 5spd.....not sure about the LB3.
|
|
|
Post by merc460 on Nov 5, 2009 11:07:14 GMT -5
LA2 is a 5 speed and the LB3 is an Automatic ECU. are you using a 5 speed in your swap? If so you can use them both.
|
|
|
Post by immloki on Nov 7, 2009 18:07:18 GMT -5
I am using a 5spd with the swap. I just didnt know which one would be the better one to use.
|
|
|
Post by Stinger on Nov 8, 2009 21:06:45 GMT -5
They are basically the same. You can try them both if you want. Odds are you won't notice any real difference though.
|
|