|
Post by 88turbobird on Mar 20, 2019 16:21:35 GMT -5
I have a coilover setup on the car and just saw today while working on it that the hood is coming into contact with the top of strut; the piece that is used to adjust the strut dampening stiffness. I’ve had the coilovers for over a year now and this was never an issue. What could cause this all of a sudden? The strut left a nice dent on the inner hood and now the hood is not sitting flush when closed. Could the hood brackets have shifted? The car has been on jack stands for a few months. Not sure if that would/could cause anything. What do you guys think?
|
|
|
Post by Stinger on Mar 20, 2019 23:05:41 GMT -5
Normally they come with thread spacers that can be installed in different configurations to move the strut up/down in the camber plates. I can't say what made it change (if anything) but you should be able to move the spacers around to lower the strut relative to the hood.
|
|