gt350r
Boosting 10 psi
Posts: 36
|
Post by gt350r on Apr 27, 2019 15:41:54 GMT -5
Anyone have a diagram of explanation of how to plumb a Tial wastegate with an Ecoboost set up on a Pimp?
|
|
|
Post by Stinger on Apr 27, 2019 23:31:22 GMT -5
FAQ thread in the PiMP section or PiMPxs section covers that for at least one version of the Ecoboost BCS.
|
|
gt350r
Boosting 10 psi
Posts: 36
|
Post by gt350r on Apr 28, 2019 0:23:25 GMT -5
FAQ thread in the PiMP section or PiMPxs section covers that for at least one version of the Ecoboost BCS. Nothing specifically for a 2 port Tial style wastegate?
|
|
|
Post by Stinger on Apr 28, 2019 13:58:52 GMT -5
External wastegates are almost always 2 port (I've never seen a single port but I won't say they don't exist) so there isn't anything unique to the 2 port TiAl. You don't have to use both ports in the vast majority of cases. You just leave the "top" port open and everything works great.
What's the wastegate spring pressure and how much max boost are you wanting to make?
|
|
gt350r
Boosting 10 psi
Posts: 36
|
Post by gt350r on May 4, 2019 16:10:52 GMT -5
Ok.
No idea on the spring. Bought this stuff used but was on a 2.3. Hoping to run 20psi or so.
|
|
|
Post by Stinger on May 4, 2019 19:07:14 GMT -5
Normally the 2nd port on the gate is only useful if you're trying to run way more than twice the wastegate spring pressure. Slim chance that the wastegate spring is under 10psi so you'll be fine with a single port.
|
|