|
Post by mikeyb0013 on Aug 4, 2021 21:30:18 GMT -5
I have a sensor located on the lower intake driver side front of my 85 SVO. It’s a two pin with a threaded section and a solid tip. The sensor is round with 3 fins on it. There are no ACT’s listed for the 85.
I’ve searched the net but can’t find anything mentioning a sensor in that location. Is it an ACT or coolant temp sensor.
Any help would be appreciated
Mike
|
|
|
Post by Stinger on Aug 4, 2021 23:59:51 GMT -5
ACT doesn't have a solid tip, it has to let air into the element to get a reading. Coolant has a solid tip (pointed) and goes into the coolant port, knock sensor has a cylindrical solid end and is in a "dead" hole.
|
|
|
Post by mikeyb0013 on Aug 5, 2021 5:50:29 GMT -5
Thank you ACT doesn't have a solid tip, it has to let air into the element to get a reading. Coolant has a solid tip (pointed) and goes into the coolant port, knock sensor has a cylindrical solid end and is in a "dead" hole.
|
|