Fuel hose sourcing

[slumlord]

Is there any source for the soft lines from the hard line to the fuel rail or am I fabricating? 

[Stinger]

What application? Are you referring to the plastic line Ford used on some applications?

[1989merkur]

Don't know if this what you are looking for but I used something similar to these to go from Ford hard lines to a an-6 line on my merkur. I do not recall if this was the exact part number you may need to research it a bit good luck!
www.amazon.com/dp/B001P2CKVY/ref=cm_sw_r_cp_apa_glc_fabc_8PM2Q6WYYWFF29SNJ02K?_encoding=UTF8&psc=1

[irsmart21]

I don't know if this would be any help in your quest, but I did a small write up about what my findings were when making stainless braided hoses for my body-to-fuel rail connection:

stinger-performance.proboards.com/thread/4341/fuel-rail-replacement-line-issue

[slumlord]

That's exactly what I was looking for thank you all. The time lapse between my posts should sadly show you how much my project has been delayed by various mostly pandemic related things. Finally got my block back from the machine shop. Small step, but getting back on track.