|
Post by irsmart21 on Feb 11, 2022 15:48:40 GMT -5
I don't know if here or in the general forum would be best for asking this question. If it needs to be else where, please move it.
For those of you that have done the COP/CAS conversion on a 4 cyl Fox, do you have any suggestions on where to mount the coils and what shorter plug wires you used to connect the plugs to the coils. I am just in the planning stages now and could not find an existing thread that discussed this.
Thanks for any insight shared :-)
|
|
|
Post by Stinger on Feb 11, 2022 21:32:43 GMT -5
Magnacore or Firecore will make you custom wires for about the same price as you could buy the materials (and they will be higher quality).
You can mount them on the firewall, or on the inner fender, or on the cam cover (if you've got a rotated upper intake).
|
|